Wear Generates Wear 

Home

Depth Filter

Why use depth filter

Products

Applications

About Oil-Fuel

References

FAQ

 Tests

Contact

 

 

1- Oil and Fuel Filters

2- Filtration Units

3- Water removal

4- Transformer Oil Filters

        4.1 - Units for Water Retention

        4.2 - Vacuum Dehydraters

5- Cooking Oil Filters

6- Strainers (cleanable-reusable filter elements)

7- Water Separators/Water Retention Units

 

 

FILTERS   

 

Filters for oil and fuel

ø90mm MF90X-X  PRODUCT  FUEL (L/Min) HYDRAULIC OIL* (L/Min) ENGINE OIL** Sizes
  2 m 5m 10m 2 m 5 m 10 m (2 m suggested) mm 
MF901-X    8 10 15   1,3 2 5 8-10 Liters Oil Pan ø90mm L:346 mm
MF902-X    14 20 28   2,6 4 8 16-35 Liters Oil Pan ø90mm L:525 mm
MF904-X    30 40 50   6 8 12 35-70 Liters Oil Pan  ø90mm L:875 mm

X signifies micron value of the elements

Can be installed as on-board, in-line on fuel system.

* For ISO VG46 oil @ 40 0C.

Flow values will change depending on the viscosity and temperature. Pre-heating may be necessary in case of high viscosity and cold climates.

**Suggested for on-board by-pass onnection. May be used as off-line filtration buggy.

 

ø130mm MFX-X  PRODUCT  FUEL (L/Min) HYDRAULIC* OIL (L/Min) ENGINE OIL**  Sizes
  2 m 5 m 10 m 2 m 5 m 10 m (2 m tavsiye edilir) mm 
MF1-X    5 8 10   1 2 4 10-16 Litre karter  ø130mm L:346 mm
MF2-X   10 15 20   2 4 8 16-35 Litre karter  ø130mm L:525 mm
MF4-X   20 30 40   4 8 16 35-70 Litre karter  ø130mm L:875 mm

X signifies micron value of the elements

Can be installed as on-board, in-line on fuel system.

* For ISO VG46 oil @ 40 0C.

Flow values will change depending on the viscosity and temperature. Pre-heating may be necessary in case of high viscosity and cold climates.

**Suggested for on-board by-pass onnection. May be used as off-line filtration buggy.

 TopOfThePage

OIL  and  FUEL FILTRATION UNITS

 

PU-1MF1-X PU-1MF4-X PU-2MF4-X PU-4MF4-X PU-7MF4-63-X

 

Configuration

-220/380 VAC electric motor

-Thermical switch

-5 bar pressure relief valve

-Pressure Gauge

 

Filters Used:

For Oil:

MF1:       1 L/Min 

MF2:       2  L/Min 

MF901:   1,2 L/Min

MF902:   2,4 L/Min

For Fuel:

MF1:       5 L/Min 

MF2:     10  L/Min 

MF901:   8 L/Min

MF902: 12 L/Min

 

 

Configuration

-220/380 VAC electric motor

-Thermical switch

-5 bar pressure relief valve

-Pressure Gauge

 

Filters Used:

For Oil:

4 L/dak (for 40 0C ISOVG46 oil). 

For Fuel:

20 L/Min 

 

Configuration

-220/380 VAC electric motor

-Thermical switch

-5 bar pressure relief valve

-Pressure Gauge

 

Filters Used:

For Oil:

2MF4:       8 L/Min 

For Fuel:

2MF4:       40 L/Min 

 

Configuration

-220/380 VAC electric motor

-Thermical switch

-5 bar pressure relief valve

-Pressure Gauge

 

Filters Used:

For Oil:

4MF4:       8 L/Min 

For Fuel:

4MF4:       40 L/Min 

 

Configuration

-220/380 VAC electric motor

-Thermical switch

-5 bar pressure relief valve

-Pressure Gauge

 

Accuracy: 1- 2-5-10 microns

Capacity: 20 L/min (for 2 micron filter and 40 0C ISOVG46 oil. 

Optional water absorbant element and preheating.

Filters Used:

For Oil:

MF904:  20L/min (2 m filter and 40 0C ISOVG46 oil.

For Fuel:

MF904: 120 L/dMin (Fuel)

 TopOfThePage

PU-1MF1.63-02

FILTRATION UNIT FOR ENGINE OIL AND FUEL FOR PASSENGER CARS AND LIGHT COMMERCIAL VEHICLES

1,2 L/Min Pump, 

120 W;    1500 D/D;  220VAC motor

Max Pressure 3 bars

MAINTENANCE FILTRATION UNIT For Engine Oil and Fuel

Used for periodical maintenance of engine lube oil. 

CAn be used as kidney unit to withraw oil from oil pan, circulate through filter and return the filter outlet back to the oil pan.

15-20 min of filtration will be enough to have the oil cleaned thoroughly.

Advantages:

- Extends oil life (Analysis prove that contamination and soot level make it necessary to replace oil before the physical and chemical life of the oil is depleted).

- Extends the life of OEM oil filter elements.

- Prevents bearing wear and extends engine overhaul life.

 

Left: Eurodizel; Right: same fuel filtered with our 2 micron element. Clarity difference due to filtered particles and humidity in fuel. 

FUEL FILTRATION

You can clean the fuel tank of your vehicle. Use filter elements with water absorbant outer layer if existance of water is a big problem.

Advantages:Clean fuel means?

- 3-7 % of fuel saving (contaminant and water free fuel will provide optimal combustion in the cylinder).

- Extends OEM fuel filter life by 3-4 times (ultra clean fuel free of water will take the dirt load of the OEM filters)

- Protects fuel injectors and fuel pumps from blockage, wear and erratic operation (Common Rail fue injection systems work under very high pressures. Dirt particles in fuel results in wear on injector nozzles and fuel pressure pump).

- Diesel particle filters effective life will be increased due to much lower emmission levels.

TopOfThePage

 

HİGHER CAPACITY FILTRATION UNITS (PREHEATER AND WATER SEPARATOR UNITS OPTIONAL)

Call for higher capacities

 

Aynı gövde içerisinde çoklu filtre kolonu kullanımı ile filtrasyon kapasitesi yükseltilir

Donanım Bilgisi

Filtration accuracy: 1-2-5-10 microns

Capacity

Oils:30 and higer L/min (Flow values stated for 1-2 µ filter and 40 0C ISOVG46 viscosity oils. Flow will change depending on the viscosity and temperature conditions)

Fuel:120 L/min and higher

-220/380 VAC electrik motor

-Thermical protection

-5 bar pressure relief valve

-Flow adjustment optional

-Pressure gauge

30x30x2 profil frame, with wheels as required by the customer

Optional: Preheater 

Optional: Water absorbant element or coalescer unit

 

 TopOfThePage

WATER FILTRATION

Can be configured with or without pump/motor powered. (PU: with motor/pump; KU: without motor/pump)

UNIT CAPACITY - L/Min Filtration Level  
2 m 5m 10m  
SPU/SKU-1MF1-X 8 12 16 2-5-10 micron
SPU/SKU-1MF2-X 16 20 30 2-5-10 micron
SPU/SKU-1MF4-X 32 40 60 2-5-10 micron
SPU/SKU-2MF4-X 64 80 100 2-5-10 micron
SPU/SKU-4MF4-X 120 140 180 2-5-10 micron
SPU/SKU-7MF4-X 200 240 280 2-5-10 micron

Ask for higher capacities

   TopOfThePage

TRANSFORMER OIL FILTRATION UNITS

UNITS WITH WATER ABSORBANT ELEMENTS

Units

Prefilter + 1 m filter + Heater + Water Absorbant

Capacity

L/Min

L/Hour Water Holding Capacity

PU/TOF-SA-1MF4-X

16

1000

2-4-6 liters

PU/TOF-SA-2MF4-X

32

1800 4-6-8 liters

PU/TOF-SA-4MF4-X

60

3600 4-6-8-10 lliters

PU/TOF-SA-7MF4.63-X

100

6000 6-8-10-12 liters
  PU/TOF-SA-19MF4.63-X      300 18000 6-8-10-12-18 liters

PROCESS: Oil is preheated to 50-60 0C and circulated through water absorbant elements and fine filter elements. Prefilter may be needed for excessively dirty oils. Oil oil can be recirculated until desired dryness and cleanliness is achieved. The oil after filtration is 2-3 levels cleaner than new oil. 

 

Dirty transformer oil samples (right side at each picture); and oil after dried and filtered A small size unit A larger size unit

          

A dirty transformer oil on the left; filtered once and twice on the right

Left:A 60 lpm unit

TopOfThePage

VACUUM DEHIDRATOR UNITS

 
 
ZY Single Stage VAcuum Dehidrator   ZYD Double Stage Vacuum Dehidrator Unit

  

  Vakumlu Trafo Yağ Temizleyici ZY - Tek Kademe ZYD - Çift Kademe

Tipi

Unit ZY30 ZY50 ZYD30 ZYD50

Debi

L/H 1800 1800 3000 3000

İşletme Vakumu

MPa -0.06-0.095 -0.08-0.095

İşletme Basıncı

MPa ≤ 0.4 ≤ 0.4

Sıcaklık Aralığı

0C 20 80 20 80

Dielektrik direnci

KV ≥ 65 ≥ 75

Su İçeriği

ppm ≤ 5 ≤ 3

Gaz içeriği

% ≤ 0.1 ≤ 0.1

Partikül büyüklüğü

μ ≤ 1 ≤ 1

Alevlenme Noktası (close cup)

°C ≥ 135 ≥ 135

Sertlik

PH ≥ 5.4

Asit Değeri

mgKOH/g ≤ 0.03

Dielektrik- faktör kaybı

  tgδ (90)% ≤ 0.005

Güç besleme

380v 50Hz,3Ph (As per user’s option

İşletme gürültüsü

dB(A) ≤ 6585

Isıtma gücü

Kw 15 30 24 30

Toplam güç

Kw 16,5 33,5 27,7 35,5

Giriş(Çıkış) port ölçüleri

mm f25 f32 f25 f32

Ağırlık

kg 270 300 650 750

 

Ölçüler

 

L

mm 1050 1200 1500 1500

W

mm 750 950 1250 1250

H

mm 1450 1500 1700 1750

  

TopOfThePage

KIZARTMA YAĞI FİLTRELERİ

40 L/dak kapasiteli Kızartma Yağ Filtresi

180 °C sıcaklıkta süzme yapılabilir

400-200-50 mikron ön süzgeç (pompa öncesi)

2 mikron ince filtre

10 L/dak kapasiteli Kızartma Yağ Filtresi

180 °C sıcaklıkta süzme yapılabilir

150 mikron ön süzgeç (pompa emişinde)

50-25-10 mikron ön süzgeç (pompa çıkışı filtre öncesi

2 mikron ince filtre                         Broşürü indir

    SÜZGEÇ

        Süzgeç elemanları mikron değerleri: (µ: 5 -10 - 25 - 50 - 100 - 150). 

    

Kapasite

Litre

20

10

5

3

1

0,2

Çap

mm

219

169

129

129

129

78

Boy

mm

550

450

400

250

80

50

Süzgeç iç eleman mikron değerleri 5-10-25-50-100-150 mikron olarak 3 veya 4 kademeli olarak seçilebilir.

Süzgeç elemanı silindirik veya levha biçiminde yapılabilir.

Malzeme isteğe göre paslanmaz çelik veya normal çelik malzeme olabilir.

 TopOfThePage

     

 TopOfThePage

 

Toplam ziyaret: